Performance

+ = low/slow ++++ = very high/very fast o = limited, test required ● = suitable - = not suitable

• Recommended application weight 5-7 g/m² (wet-on-wet)
• Ideally suited for :
  - Board
  - Single-sided applications
  - Conventional coating units (Anilox/2 Roller systems; Anilox preferred)
  - Keep pile temperatures below 30oC

Physical Properties
● Appearance              : Opaque liquid
● Solids                      : 48% ± 4%
● Viscosity                  : 60 Sec. ± 4 Sec DIN 4 @ 20oC
● Specific gravity         : 1.04 g/cm³ ± 0.04

• Storage & Handling : Protect from direct sunlight. Maintain storage temperature from 5oC to 30oC. Keep containers tightly closed, when not in use
• Shelf-life : 12 months from the month of manufacture if stored in unopened original packing, between 5oC to 30oC and not exposed to direct sunlight
• Packing : 20 kg containers; 210 kg drums and bulk options
• Caution : Avoid contact with skin and eyes. Use of hand gloves and safety glasses are recommended

Recommendation

● Use alkali and solvent resistant inks
● Circulate or stir well prior to use

Thinning
● Reduce viscosity with water, if required

Cleaning

● Use AniKleen Sol diluted with plain water for initial wash-up of blanket, roller & other parts of the machine
● Use AniKleen Sol to remove dried coating from the blanket, roller & other parts of the machine
● Use AniKleen Paste for thorough cleaning of Anilox Roller