NeoBond HMM 9772 is clear light yellow colored synthetic rubber based hotmelt pressure sensitive adhesive for general purpose applications. The product exhibits good bonding strength and good initial tack. It is suitable for bonding of various range of substrates.

NeoBond HMPU 100 is solvent-less Mono Component PU Adhesive system for lamination of Film/ Foil to Paper/Board on Steinmann type machines for Graphic Art Packaging applications & Nordmechanica type Flexible Packaging application. Normally the coating is applied on to film and then laminated to other substrate (paper/board). Best suited for food packaging.

• Grade: HMPU
• Colour & Appearance: Clear to slight pale yellow
• Peel Value@ 180°: Approx. 1.0N/cm
• Nip Roller: 60oC (depending on type of substrate)
• Coating: 2.0 gms to 6.0 gms for Paper/Board to Film/Foil

NeoBond PSH 8078 is a hotmelt pressure sensitive Adhesive with quick melting characteristics, suitable for pressure sensitive label manufacturing applications in label stocks, holograms and medical tapes.

• Grade:  PSH
• Toxicity: None
• Appearance: Transparent light brownish pillow
• Softening Point: 90 ± 2oC
• Oil Bleeding Test: No Oil Migration @ 70oC for 72hrs
• Application temperature    : 150oC to 160oC

NeoBond PSW 1111 is palate gum which is used in screen printing application for fixing cloth (Cotton, Nylon, Polyester & other types) on wooden table/platform. Can be used as it is or after dilution. The application is done by rubbing glue on printing table by squeegee & drying it by hand dryer /machine heater.

• Grade         : PSW 
• Appearance : Milky white emulsion
• Film            : Forms a continous and transparent film on palate
• pH               : 5.0 + 1.0

NeoBond PSW 2055 is suitable for Pressure Sensitive coating application in BOPP Packaging Tapes, Holographic labels, Stickers, Label Stocks, Envelope Flaps and other allied uses.

• Grade                                 : PSW
• Appearance                         : Milky white viscous liquid
• Unreacted Monomer             : Approx.0.5
• pH                                      : 6.0 ±1.0

NeoBond PSW 5200 is suitable for Pressure Sensitive coating application in BOPP Packaging Tapes, Holographic labels, Stickers, Label Stocks, Envelope Flaps and other allied uses

• Grade                                 : PSW
• Appearance                         : Milky white viscousliquid
• Unreacted monomer            : Approx.0.5
• pH                                      : 6.0 ±1.0

NeoBond PSW 5500 Grade is designed for low peel adhesion and tack on various substrates. 

• Grade                        : PSW
• Appearance                : Milky white low viscous liquid 
• Unreacted monomer    : Approx 0.5
• pH                             : 8.0 + 0.5

NeoBond PSW 6000 is suitable for Pressure Sensitive coating application in BOPP Packaging Tapes, Holographic labels, Stickers, Label Stocks, Envelope Flaps and other allied uses

• Grade                        : PSW
• Appearance                : Milky white viscous liquid
• Unreacted monomer   : Approx 0.5
• pH                             : 6.0 + 1.0

NeoBond PSW 7055 is water based adhesive suitanle for pressure sensitive label manufacturing applications in BOPP packaging tapes, Holographic Labels, stickers, label stocks, envelope flaps and other allied users.

• Grade                            : PSW
• Appearance                    : Milky white viscous liquid
• Unreacted monomer        : Approx 0.5
• pH                                 : 6.0 + 1.0

Solvent Less Mono Component PU Adhesive system for lamination of Paper or Board to Films and Foil on Steinmann type machines for Graphic Art Packaging Applications & Nordmechanica type Flexible Packaging Application. Normally coating is applied on to paper and then laminated to other substrate.

• Grade: PUR
• Colour & Appearance: Clear to slight pale yellow
• Peel Value@ 180°: Approx. 1.0N/cm
• Nip Roller: 60oC (depending on type of substrate)
• Coating: 2.0 gms to 6.0 gms for Paper/Board to Film/Foil

NeoBond PUR 2A (NCO) & 2B (OH) is Solvent Less Bi Component PU based Adhesive System. It is used in the ratio of 100:60 parts for LLDPE and 100:70 parts for Metalized on high speed solvent less machines like Nord Mechanica. Suitable for laminates using following films: PET, BOPP, MCPP, LLDPE, MET BOPP etc.

PUR 80/HD-75N is a two component PU based general to medium performance adhesive for a versatile range of FlexiblePackaging applications and is suitable for standard laminates as well as triplex laminates. This Adhesive shows good bond strength on Al Foil, PET-MPET, LLDPE, BOPP, MBOPP, CPP, MCPP etc.

• Grade: PUR
• Colour & Appearance: Clear to slight pale yellow
• Specific Gravity: 1.18 + 0.22